Options

X-Treme Booster - 110ml

X-Treme Booster - 110ml
[X-Treme Boos]

X-Treme Booster - 110ml
$32.95

Available quantity  

Produced by the glue experts that make the popular REvolution 3 Glue.
X-Treme Power Booster is virtually VOC free* (< 4ppm), odour-free, not harmful to players, bio (natural raw materials), biodegradable and green (no toxic content).
It has a very strong boosting effect and is long-lasting. It lasts the entire life of the rubber sheet.
Watch: How to apply it:




Instructions for applying first time

There are 2 recommended methods for applying the booster:

Method A (recommended for new rubbers or rubbers with no glue residue)

If this method is applied correctly there is no need to re-tune your rubber.

1) Apply 2 layers of X-Treme Power Booster on sponge (second layer after 15 minutes).
2) Apply another 1 layer after 12 hours (for Chinese rubbers apply another 2 layers at 12 hour intervals).
3) Let the sponge dry for 48 hours (72–96 hours for Chinese rubbers).
4) Apply 3-4 layers of elastic glue on your sponge, and 1-2 layers of glue on blade and assemble your racket. Let all glue layers completely dry each time you apply them.
5) Keep your racket in a racket press for 12 hours.

Method B (recommended for old rubbers with glue that you cannot peel off)

1) Apply 2 layers of elastic glue on sponge, letting each layer dry completely.
2) Apply 2 layers of X-Treme Power Booster (second layer after 15 minutes).
3) Apply another 1 layer of X-Treme Power Booster after 12 hours (for Chinese rubbers apply another 2 layers at 12 hour intervals).
3) Let the sponge dry for 48 hours (72–96 hours for Chinese rubbers).
5) Apply 2 layers of elastic glue on your sponge and 2 layers on blade and assemble your racket (let all layers completely dry – 12 hours).
6) Keep the racket in racket press for 12 hours.

Re-tuning Instructions

1) Remove your rubber from the blade carefully, keeping the glue layer intact. Do not peel off the glue layer.
2) Let the rubber sit for 12 hours.
3) Apply 1–2 layers of X-Treme Power Booster on your glue and let them dry for 24 hours.
4) Apply 1 layer of elastic glue, and 1 on your blade and assemble the racket. Let the glue
let it dry completely. 
5) Keep the racket in racket press for 12 hours.

Other methods

You can experiment with different layers of glue and booster until you find the right recipe that gives you the performance that suits you. If you have other method ideas, do let us know!

* A VOC-rating of < 4ppm is considered acceptable and would pass the Mini-Rae test. Remember that many rubber sheets have VOC that would fail the Mini-Rae test when opened. Remember to leave your rubber sheets open for 30 minutes when unpacking them to clear any factory VOC.

 

Warning

No chemical or physical treatment on rubbers is allowed according to ITTF regulations. This product is not recommended to be used in official competitions. Using the product in official competitions is the full responsibility of the player.

This product was added to our catalog on Monday 14 April, 2014.